Mobile Receiver Setup And Operation; Mobile Wireless Setup; Accepting An Incoming Call - Phonic Ear HearIt Media User Manual

Mobile receiver setup and operation

Mobile setup

Mobile wireless setup

1. Press the R1
lights come on.
2. Enter the menu on your mobile phone to search for available Bluetooth devices.
Select the Bluetooth entry "S HearIt Media" .
3.
4. Enter the pass code into the mobile telephone (0000). Select connect. A short
beep will be heard in the hearing aid or in the headphones.
5. Once the wireless connection is established, the HearIt Media receiver indicator R3
stops blinking blue.
Once a wireless connection between HearIt Media and a Bluetooth unit has been established,
the units will automatically connect when they are within range of each other.
Please note:
You can't connect your mobile phone to HearIt
Media while watching TV with HearIt Media.
Press the R1 button on the HearIt Media receiver
to turn of the TV sound. Now connect your
mobile phone to HearIt Media. You can now turn
on the TV sound again by pressing the R1 button.
When you press the R1 button and turn on the HearIt Media receiver, it goes into
connection mode for the next 5 minutes. If you haven't setup the wireless connection
within 5 minutes, you have to turn off and turn on the receiver again.
Mobile operation

Accepting an incoming call

1. When a call comes in, a ringing tone will be heard in the hearing aid or headphones
and the HearIt Media receiver indicator R1
2. Press the HearIt Media receiver button R1
3. Press the HearIt Media receiver button R1
Please note:
Only make a single short push to accept
or end a call. It may take a couple of
seconds before a call is completely
button on the HearIt Media receiver for 5 seconds until the
2
3
S HearIt Media
starts blinking blue.
to accept the call.
to end the call.
2
1
R1 R1
R3
5
3
R1
7