Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 79. Items not
listed in the chart should be lubricated at the General Lubrication
interval.
NOTE:
The a-arms and upper control arms are lubricated at the factory, and
no additional lubrication will be needed. However, if these components
are subjected to severe use, grease zerks have been provided for
additional lubrication at the user's discretion.
Item
Engine Oil
Brake Fluid
Transmission Oil
Demand Drive
Fluid
(Front Gearcase)
ADC Fluid
Front Prop Shaft
Yoke
Lube
PS-4 PLUS
Performance
Synthetic 2W-50
DOT 4 Only
Polaris AGL Syn-
thetic
Gearcase Lube
Demand Drive LT
Premium Fluid
Polaris ADC Fluid
Polaris Premium
U-Joint Lube
MAINTENANCE
Capacity at
Fluid Change
2 qt. (1.9 l)
See page 84.
---
See page 40.
32 oz. (948 ml) See page 92.
9.3 oz. (275 ml) See page 93.
---
See page 94.
---
Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of stor-
age, or after pressure wash-
ing or submerging.
Front Prop Shaft Yoke
Inspection Procedure
83