Polaris Outlaw 9922483 Owner's Manual page 177

Engine Turns Over, Fails to Start
Possible Cause
No spark to spark plug
Overuse of choke/flooded engine
Low battery voltage
Ignition system or other mechanical failure
Throttle ETC switch not opening
The plug connection of the CDI-unit, pulse generator
or ignition coil has oxidized
Solution
Inspect, clean and/or replace spark plugs
See your Polaris dealer
Engage starter 2 times for 5 seconds each, then restart.
If engine fails to start, inspect, clean and/or replace
spark plugs.
Recharge battery to 12.8 VDC
See your Polaris dealer
Adjust throttle freeplay
Clean the plug connection and treat with contact spray
Troubleshooting
173