Table of Contents
Advertisement
GW0221 User Manual
The GW0221 is compliant with various safety standards including FCC/CE and C-Tick. Its power
adaptor is compliant with UL standard. The GW0221 should only operate with the universal power
adaptor provided in the package.
Warning: Please do not use a different power adapter. Using other power adapter may damage the
GW0221 and will void the manufacturer warranty.
Caution: Changes or modifications to this product not expressly approved by Van Access, or operation
of this product in any way other than as detailed by this User Manual, could void your manufacturer
warranty.
Information in this document is subject to change without notice. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose
without the express written permission of Van Access.
5.1 Get Familiar with Voice Menu
GW0221 has stored a voice prompt menu for quick access to settings and simple configuration. You
can enter this voice prompt menu two ways:
1) Pick up the receiver (or press the Hands free button) of the analog telephone and press "***",
or
2) Pick up the receiver (or press the Hands free button) of the analog telephone and press the
light button in the middle of the GW0221.
A voice will say, "Enter the new option." At this point, you can select from the following menu voice
prompt options to begin using the GW0221:
Menu
Voice Will Say the Following:
Main Menu "Enter a new option"
01
"DHCP Mode", "Static IP Mode"
02
"IP Address " + IP address
03
"Subnet " + IP address
04
"Gateway " + IP address
05
"DNS Server " + IP address
06
"TFTP Server " + IP address
5 BASIC OPERATIONS
Enter "*" for the next menu option.
Enter "#" to return to the main menu.
Enter "9" to select between "DHCP" or "Static" mode.
The current WAN IP address is announced. Enter 12
digit new IP address if in Static IP Mode.
Same as menu 02
Same as menu 02
Same as menu 02
Same as menu 02
Options
4/24
Advertisement
Table of Contents
