Saving The Configuration Changes - VanAccess GW0221 User Manual

GW0221 User Manual
Allow users to forward a matching (TCP/UDP) port to a specific LAN IP
Port Forwarding:
address with a specific (TCP/UDP) port.
Options
Default "123". This contains the password to access the Web Configuration
Basic User Password
Menu. This field is case sensitive.
Options
The device ID, in HEX format. This is a very important ID for ISP
MAC Address
troubleshooting.
There are 2 modes under which the GW0221 can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the chipset's memory). The
GW0221 will acquire its IP address from the first DHCP server it discovers from
the office/home network it is connected to. To use the PPPoE feature, the
WAN IP Address
PPPoE account settings need to be set. The GW0221 will attempt to establish a
PPPoE session if any of the PPPoE fields have been entered with data.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured by the user. These fields are reset to zero by default.

6.1.7 Saving the Configuration Changes

Once a change is made, users should click on the "Update" button in the Configuration page.
Other Settings
Meaning
CURRENT STATUS PAGE
Meaning
20/24