Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for VanAccess GW0221
-
Page 1: User Manual
User Manual GW0221 User Manual GW0221 Analog Telephone Adaptor... -
Page 2: Table Of Contents
9 WARRANTY .......................... 22 1 WELCOME GW0221 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability. The GW0221 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market. -
Page 3: What Is In The Package
GW0221 User Manual GW0221 allows call origination and termination from/to the PSTN line (via FXO port which is labeled “Line”) and automated emergency call routing through PSTN network (in the case of power failure). 2 WHAT IS IN THE PACKAGE... -
Page 4: Installations
GW0221 has one FXS port (labeled “Phone”) and one FXO port (labeled “Line”). After setting up the GW0221, you can make PSTN calls by pressing *00. Without pressing *00, all your calls will be VoIP. You can also receive PSTN calls and VoIP calls. -
Page 5: Basic Operations
5 BASIC OPERATIONS 5.1 Get Familiar with Voice Menu GW0221 has stored a voice prompt menu for quick access to settings and simple configuration. You can enter this voice prompt menu two ways: 1) Pick up the receiver (or press the Hands free button) of the analog telephone and press “***”, 2) Pick up the receiver (or press the Hands free button) of the analog telephone and press the light button in the middle of the GW0221. -
Page 6: Make Phone Calls
• Just like pressing “***” on the analog telephone, you can also access the voice menu by pressing once on the center light button of the GW0221. By pressing twice on the light button, you will hear “Direct IP Calling”, which is just like selecting option 47 from the table above. -
Page 7: Ip-To-Ip Dialing Instructions
• Both GW0221 and the other VoIP device (i.e., another GW0221 or another SIP device) have public IP addresses, or • Both GW0221 and the other VoIP device (i.e., another GW0221 or another SIP device) are on the same LAN using private or public IP addresses, or •... -
Page 8: Attended Transfer
3. Party A can hang up. Note: When Attended Transfer failed and if party A hangs up, the GW0221 will ring party A again to remind party A that party B is still on the call, by pressing FLASH or Hook again will restore the conversation between party A and party B. -
Page 9: Call Features
When in conversation without an incoming call, this action will switch to a new channel to make a new call. 5.3.2 PSTN Pass Through When GW0221 is out of power or loses registration or if the network connection is down, the RJ 11 8/24... -
Page 10: Status Light Indicator
GW0221 User Manual line jack on the side of GW0221 will function as a pass through connection for PSTN calls. Users will be able to use the same analog phone for PSTN calls. 5.4 Status Light Indicator Following tables show the GW0221 button light pattern indication. - Page 11 GW0221. After connecting the cable, confirm that the green light of the LAN port is on. If the green light is not on, this means that your PC is not yet properly connected to the GW0221 via the LAN port.
-
Page 12: User Programming And Configuration
GW0221 User Manual After enabling WAN access, be sure that the WAN port of the GW0221 is connected to an uplink (i.e. router, hub, switch, etc). Then, get the WAN IP address of the GW0221 by following section 5.1 of this user manual and selecting menu option 02. -
Page 13: Passwords
End User Password for access to Basic User Options: 6.1.6 Configuration Options and Explanations After a correct password is entered in the login screen, the embedded web server inside the GW0221 will show the configuration page, which is explained in details below:... - Page 14 Use DNS SRV: Default is No. If set to Yes, then the client will use DNS SRV for server lookup If the GW0221 has an assigned PSTN telephone number, then this field should be User ID is Phone set to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone” parameter Number will be attached to the “From”...
- Page 15 STUN server. If the detected NAT is a Full Cone, Restricted Cone, or a Port- Restricted Cone, the GW0221 will attempt to use its mapped public IP address and port in all of its SIP and SDP messages.
- Page 16 Audio Settings Options Meaning The GW0221 supports up to 7 different Codec types including G.711 A-/U-law，G.723.1, G.726, G.728, G.729A/B, iLBC. Users can configure Codecs in a preference list that will be included with the same preference order in SDP Preferred Codec message.
- Page 17 G729 or G711 or G726, then the “ptime” value in the SDP message of an INVITE request will be 20ms. If the configured voice frames per TX exceeds the maximum allowed value, the GW0221 will use and save the maximum allowed value for the corresponding first codec choice. The maximum value for PCM is 10(x10ms) frames;...
-
Page 18: Other Settings
Please note that only the user part of a SIP Off-hook Auto-Dial address needs to be entered here. The GW0221 will automatically append the “@” and the host portion of the corresponding SIP address. Default is “No”. If set to “Yes”, Call Forwarding & Do-Not-Disturb are supported... - Page 19 GW0221 User Manual Other Settings Options Meaning The URL for the HTTP server used for firmware upgrade and configuration via HTTP. For example, http://upgrade.myVoIPservice.com:6688/GATE102 HTTP Upgrade Here “:6688” is the specific TCP port that the HTTP server is listening to, it can Server be omitted if using default port 80.
- Page 20 DHCP IP Lease Time: address are assigned to the LAN clients NAT Settings Options Meaning Forward all WAN IP traffic to a specific IP address if no matching port is used by DMZ IP: GW0221 itself or in the defined port forwarding. 19/24...
-
Page 21: Saving The Configuration Changes
(even though they are still saved in the chipset's memory). The GW0221 will acquire its IP address from the first DHCP server it discovers from the office/home network it is connected to. To use the PPPoE feature, the WAN IP Address PPPoE account settings need to be set. -
Page 22: Rebooting The Gw0221
Follow section 5.1 with voice menu option 01 to enable GW0221 to use DHCP. 6.2.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable GW0221 to use STATIC IP mode, then use option 02, 03, 04 to set up GW0221’s IP, Subnet Mask, Gateway respectively. -
Page 23: Software Upgrade
Old PBX / Telephone Switch If the PSTN line that is connected the “Line” port of the GW0221 comes from a PBX or telephone switch, and the *00 feature is used to make PSTN calls, once you hang up, the GW0221 may not immediately go back to VoIP mode. - Page 24 Van Access reserves the right to remedy warranty policy without prior notification. Warning: Please do not attempt to use a different power adaptor. Using other power adaptor may damage the GW0221 and will void the manufacturer warranty. Caution: Changes or modifications to this product not expressly approved by Van Access, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty.