Drive Chain Slack Adjustment - Polaris Outlaw 9921488 Owner's Manual

Drive Chain Slack Adjustment

Hold the adjuster stud securely while tightening the jam nuts to avoid breaking the stud.
1. Loosen the four rear housing mount bolts.
2. Loosen the chain adjuster lock nut.
3. Turn the chain adjuster clockwise to 1/4"-1/2"
(6-12 mm) deflection.
4. Tighten the chain adjuster lock nut to 18 ft. lbs.
(25 Nm).
5. Tighten the four rear housing mount bolts to 43
ft. lbs. (60 Nm).
CAUTION
Maintenance
Housing
Chain Adjuster
Mount
Bolts
151