Table of Contents
Advertisement
The aim of the individual setup is to set your eBlocker as DHCP server and gateway in your local net.
For that click on the area „Manual setup wizard". The setup wizard will help you through the process
of the individual setup.
The implementation of the individual setup leads through the following stages:
1. Setting of eBlocker as DHCP server and reboot.
2. Deactivation of DHCP services in your router/Wi-Fi access point.
3. Reboot of other network devices.
Get to know how to deactivate the DHCP service in your Internet or Wi-Fi router for step 2.
Do not follow this step if your eBlocker has not been set as DHCP server first.
Attention: Only use the individual setup mode if you have issues with the functionalities of your
eBlocker or other network devices in the automatic mode.
17.10.2017
Page 73 of 81
Advertisement
Table of Contents
