Advertisement
GMG008
2X
version 01-2014
IMPORTANT! KEEP FOR FUTURE REFERENcE
Yepp Easyfit is suitable for fitting on standard luggage carriers which
are suitable for a maximum load of 25 kg and which comply with
NEN 14872 (25 kg). The new method of installation on the side of the
carrier means it is also suitable for most e-bikes.
The Yepp Easyfit is equipped with a special frame that allows the Yepp
Maxi Easyfit child seat to be fitted straightaway.
The Yepp Easyfit can also be used together with the Yepp Junior, but
the luggage carrier must then comply with NEN 14872 (35 kg).
MOUNTING
• The Easyfit comes pre-assembled. Position the Yepp Easyfit on the
luggage carrier and tighten the bolts firmly after ensuring correct
positioning. Tighten both bolts evenly in order to achieve optimum
fixing.
• Check the bolts after a few weeks, and tighten if necessary.
• Following installation, the Yepp Maxi Easyfit can be fitted quickly
and easily.
The position depends on the type and size of the bicycle, and the
Yepp Maxi Easyfit 's centre of gravity may never be more than 10 cm
behind the rear axle (see also Yepp Maxi Easyfit instructions for use).
Advice: After installing and fitting the Yepp Maxi Easyfit, check
whether there is a risk of the bicycle tipping over backwards when
your child is placed in the seat. If that happens, you should move the
Yepp Easyfit forwards. Check regularly to ensure that all fixings are
properly secure.
WARNINGS
• Do not attempt to modify the carrier yourself, since this will void all
guarantees and/or claims for liability.
• Always remove the seat when transporting the bicycle on a car bike
carrier. Turbulence may damage the seat or the fixings, which could
lead to an unsafe situation.
• Do not use the carrier if any part is broken. Have a broken part
replaced by a professional.
• After installing check that everything has been installed correctly
and that all the fixings are properly secure.
• After installing the Yepp Easyfit make a short test ride with the
Yepp Maxi Easyfit in order to check that everything still works
correctly on your bicycle.
• The Yepp Easyfit is only suitable for installation on luggage carriers
which comply with EN14872 and are suitable for a load of at least
25 kg. If the Yepp Easyfit is used for the Yepp Junior, the luggage
carrier must be suitable for a load of 35 kg.
• Only use the Yepp Easyfit on a bicycle which is suitable for the
additional load. Check the bicycle's user manual or consult the
manufacturer or your cycle store.
• The Yepp Easyfit should never be installed on motorised vehicles
(including mopeds, scooters, etc) apart from e-bikes.
SAFETy AdVIcES
• If you want to carry cargo on the bicycle, place it in such a way that
the weight is evenly spread across the bicycle. Matching saddlebags
are available.
UK
Advertisement
