Hitachi FLASHMAX2 User Manual page 36

2. Uninstall the driver
(1) Use "rpm -q kmod-vgc-redhat6.1+" to look for old driver.
(2) Use "rpm -e < DriverName>" to uninstall it.
Example: rpm -e kmod-vgc-redhat6.1*****************.x86_64
(3) Use "rpm -q kmod-vgc-redhat6.1+" to make sure the old driver no longer
appears.
In (3), if an old driver is not uninstalled and so is still displayed, then you
cannot install a new driver.
3. Restart the system
After restarting the system, install the new driver and utility as described in
Installing driver and utility on page 3-14
3-20 Driver and Utility
PCIe Flash Drive FlashMAX2&3 User's Guide