Installing Flash Drive Driver And Utility (Windows 2012 R2); Installing Driver And Utility - Hitachi FLASHMAX2 User Manual

Installing Flash Drive Driver and Utility (Windows 2012 R2)

This section describes how to install the driver and utility for the Flash Drive
on Windows 2012.

Installing driver and utility

If older driver and utility are installed, see
page 3-11
If you have used the "Driver & Utility DVD" to install an OS with the Flash
Drive installed, then the driver and utility for the Flash Drive have also been
installed. In this case, skip to
page 3-5.
1. Copy the driver and utility package
(1) Insert the "PCIe Flash Drive FlashMax2&3 Driver and Utility Install Kit" CD
in the DVD or CD drive. From the Windows2012R2 directory, copy the
following file to any directory you like.
Virident_FlashMAX_ III -x.x.x.xxxxx.msi
2. Install the driver and utility
(1) From the current directory of the copied file, double-click
Virident_FlashMAX_ III -x.x.x.xxxxx.msi.
(2) When Virident FlashMAX III Driver Package Setup dialog box appears,
click Next.
3-2
to uninstall them.
Driver and Utility
PCIe Flash Drive FlashMAX2&3 User's Guide
Uninstalling driver and utility
Format the drive (Use FlashMAX III Manager)
on
on