Throttle Cable; Front Suspension; Rear Suspension - Polaris IQ Turbo Dragon Owner's Manual

MAINTENANCE
Lubrication
Driveshaft Bearing
Fitting
Inject grease into the fitting on the speed-
ometer sensor housing until grease purges
from the seal on the inside of the tunnel.
This should take approximately two
pumps. Do not use more than four pumps.

Throttle Cable

Lubricate the throttle cable lightly with
grease or oil. With the engine off, turn
the handlebars to the left and lubricate
liberally as shown.

Front Suspension

The front suspension and steering components do not require lubrica-
tion.

Rear Suspension

Lubricate the suspension pivot shafts with Polaris Premium All Season
Grease at the intervals outlined in the Periodic Maintenance Table
beginning on page 87 and before seasonal storage. When operating in
heavy, wet snow conditions, lubricate every 500 miles (800 km).
Lack of lubrication will adversely affect your ride and the life of the sus-
pension. For more information about suspension lubrication and adjust-
ments, see your Polaris dealer.
99