Throttle Cable Freeplay - Polaris Hawkeye 9922016 Owner's Manual

ADJUSTMENTS

Throttle Cable Freeplay

Adjust throttle cable freeplay at the handlebar.
1. Locate the throttle cable
adjuster at the handlebar.
2. Squeeze the end of the rub-
ber boot and slide it far
enough to expose the end of
the inline cable adjuster.
3. Loosen the adjuster lock nut.
4. Rotate the boot to turn the
adjuster until 1/16" to 1/8"
(1.5-3 mm) of freeplay is
achieved at the thumb lever.
NOTE:
While adjusting freeplay,
be sure to flip the throttle
lever back and forth.
5. Tighten the lock nut.
6. Squeeze the end of the rub-
ber boot and slide it over the
cable adjuster to its original
position.
104
Boot
Lock Nut
Adjuster