Working Procedures - Parts Connect IM70 User Manual

Working Procedures

Procedure
Startup
Water
Fillup
Seconds
Clean
System
pressure
balance
Seconds
Pre-Chill
Seconds
Ice-Making
Seconds
Continues
Ice-Making
Count in
Time lapse
Seconds
Water
Discharge
Seconds
Harvest
Seconds
SMG Indicator
light
All lights ON
888 for 1 second,
then OFF
COO->
Water Light
Count
ON
Ice-making &
harvest lights
flash,
CLE
water light on
if more water
is needed
C10->
Ice-making
Count
light on
C20->
Ice-making
Count
light on
C30->
ice-making
Count
light on
Ice-making
light flashing
C31->
Ice-making
Count
light flashing
C40->
Harvest light
Count
on
Starting Point/
Machine is plugged in, short press of ON/OFF (I/O)
button.
Machine program initialized.
Machine program initialized.
Water tank must be filled before pump runs, other-
wise dry run damage will occur.
Water tank is filled.
Clean water tank before making ice, startup-clean
procedure will last 6 minutes
Water tank clean.
Refrigerate systems reversing valve opens for 15 sec-
onds, compressor runs for 5 seconds, reversing valve
then closes, refrigerate system pressure is balanced.
System pressure is balanced..
Compressor runs 30 seconds, condenser fan on,
water pump off, to pre-chill the evaporator, the proce-
dure lasts about 30 seconds.
Evaporator pre-chilled.
Compressor on, condenser fan on, water pump on,
the procedure lasts about 8-12 minutes, ends when
evaporator temperature drops below presets or time is
exceeded.
Evaporator temperature is below presets.
Time lapse continues the ice making procedure for
thicker ice cubes, even if the preset temperature is
reached, default time lapse is 5 minutes.
Ice-making time lapse finished.
The water discharge procedure is to prevent the water
tank from getting too cold and causing ice in the water
tank to jam the pump system. Default water discharge
time is 20 seconds
Ice-making time lapse finished.
Reversing valve open & evaporator heated up, then
ice cubes are released. If ice cubes not released in 5
minutes, the pump turns on for 1 minute, watering the
ice cubes to help them release from the evaporator.
Detail
17