Main Key Switch; Light Switch - Polaris Hawkeye 300 2X4 Owner's Manual

Switches

Main Key Switch

End all electrical power to the vehicle.
LIGHTS ON position turns the headlights on.
Start the engine. The headlights are not on in this position.
After starting the engine, release the key switch to the POSITION
LIGHTS ON position.
Do not attach a large key fob or key ring to the main switch. It may contact
the gas tank cap when turning, causing an interruption to the electrical sys-
tem and an unexpected engine shut-down during operation. This could result
in serious injury or death.
Engine Stop Switch
The engine will not start or run when
the switch is in the OFF position.
OFF
RUN

Light Switch

The lights do not operate unless the
main key switch is on and the engine
stop switch is in the RUN position.
An indicator light on the pod will illuminate when high beam is
selected. See page 36.
High Beam
Low Beam
FEATURES AND CONTROLS
WARNING
Light
Switch
Engine
Stop Switch
35