Throttle Cable Freeplay - Polaris Hawkeye 300 2X4 Owner's Manual

ADJUSTMENTS

Throttle Cable Freeplay

Adjust throttle cable freeplay at the handlebar.
1. Locate the throttle cable adjuster
at the handlebar.
2. Squeeze the end of the rub-
ber boot and slide it far
enough to expose the end of
the inline cable adjuster.
3. Loosen the adjuster lock nut.
4. Rotate the boot to turn the
adjuster until 1.6-3.2 mm of
freeplay is achieved at the
thumb lever.
NOTE:
Move the throttle lever
back and forth while
adjusting.
5. Tighten the lock nut.
6. Squeeze the end of the rubber boot and slide it over the cable
adjuster to its original position.
NOTE:
Engine RPM should not increase when steering is turned full left or
right. Readjust cable freeplay if this occurs.
106
Boot
Adjuster
Lock Nut
1.6-3.2 mm