Alpine PKG-RSE3HDMI Installation Manual page 7

Permanent Installation of USB and
HDMI2
If desired, the second HDMI input may be permanently
wired through the headliner.
1
Remove the cover.
2
Remove 2 screws.
3
Pull entire portion.
4
Remove the door.
5
Install the HDMI/USB Cover Plate and tighten 2
screws.
6
Connect the KCU-315UH HDMI/USB Extension
Connector for PKG-RSE3HDMI (15 ft) (Sold
separately).
MEDIA PLAY
R
Rear Center Console
Route the connector to the center console through B Pillar
from inside of headliner.
KCU-315UH HDMI/USB
Extension Connector (15ft)
(Sold Separately)
KCU-315UH
HDMI/USB
Extension
Connector
7
-EN