Light Switches - Polaris 9920183 Owner's Manual For Maintenance And Safety

Light Switches

The light switch is located on the left handlebar. It's used to turn the lights on and off and
to switch the lights from HI to LO.
NOTE: The lights won't work unless the key is in the ON position and the engine stop
switch is in the RUN position.
WARNING
Operating the ATV on streets or roads, especially in darkness, could result in an
accident and serious injury or death.
Your ATV is not equipped with highway-approved lights. It's designed for and must be
used for off-road use only. Use caution and drive at reduced speeds in conditions of
reduced visibility such as fog, rain and darkness.
FEATURES AND CONTROLS
51