Stabilize The Fuel - Polaris 9920183 Owner's Manual For Maintenance And Safety

See page 173 for the part numbers of Polaris products.
Storage Recommendations
CAUTION
Starting the engine during the storage period will disturb the protective film created by
fogging and damage could occur. Never start the engine during the storage period.
Clean the Exterior
Make necessary repairs and then clean the ATV thoroughly as outlined on page 159.

Stabilize the Fuel

Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer to the fuel tank,
following the instructions on the container for the recommended amount. Fill the fuel tank
with fuel. Allow 15-20 minutes of operation for the stabilizer to disperse through the fuel in
the tank and carburetor. Turn the fuel valve off and drain the carburetor bowl.
NOTE: Carbon Clean will also reduce the possibility of bacterial growth in the fuel system.
CLEANING AND STORAGE
161