Advertisement
2) Volume Limiter Setting: Short press
until
LIM is flashing, then short press
button to turn on/off the
function. To turn on this function which will display
as
, it will limit the volume in a range. To
turn off this function which will display as
3) Squelch Setting: Short press
set button until
SQL is flashing, then short press
button to achieve the squelch setting.
4) Audio Balanced Setting: Short press
until EQ is flashing, then short press
button to achieve the audio balanced setting.
Attention
When progress setting, if none of action will be done for 3 seconds, the
system will exit setting state automatically, and save the current setting.
2.4 Battery Installation for Receiver
Press the battery compartment door
follow the direction instruction to open
2.5 Receiver Function
(1) Volume Limiter Function:W hen t urn o n t he v olume l imiter, if t he v olume r each
the level which set before, the volume will not increase anymore.
We suggest to turn on this function when use the system , it ca n prote ct th e
user s audition and decrease the distortion.
(2) Audio Balanced Setting:
Alt up 6dB
Bourdon up 6dB
Alt & Bourdon up 6dB
Keep the original state
(3) Squelch Setting: When the signal is lower than the squelch setting, the signal
indicator will light off, and the audio output is in squelch state.
2.6 Headphone
set button
LIM
.
set button
or
Install the batteries follow the battery direction
instruction which shown on the case of receiver
8
1.4 Transmitter Function
(1) Volume Limiter Function: When turn on the v olume l imiter,i f t he v olume r each
the level which set before, the volume will not increase anymore, at the same
time, the limiter indicator will lights.
We suggest to turn on this function when using the system, it can protect the
user s audition and decrease the distortion.
To gain the best effect, turn on the transmitter, then adjust the output leve l o f
equipment until the volume limiter is flashing.
RF Power 10dBM
(2) Power:
RF Power 15dBM
RF Power 20dBM
(3) Gain Control Of Input Level : To the equi pmen t i n lowe r outp ut leve l, operate
in +10dB.
(4) Input Jack:
(5) Input Connector:
Unbalanced Input Connector
Balanced Input Connector
5
Advertisement
