Advertisement
4. Mix Mode Application
Channel 1
Channel 2
Counterclockwise
Mid-Point
1. Receiver receives
two signals from
the transmitter
SYSTEM COMPONENTS
1.Receiver.....................................................................
2.Transmitter ................................................................
3.Headphone ................................................................
4.Audio cable ................................................................
5.AC power adapter for receiver....................................
6.19-inch equipment rack installation kit........................
7.Battery 1.5V................................................................
8.User guide..................................................................
3. The receiver sends the
mixed signal to both
headphones.
Clockwise
2. Using the balance knob,
the user blends the two
signals until the correct
mix is achieved.
4. The user may continue
to adjust the blend using
the balance knob
throughout the performance.
1
1
1
2
1
2
2
1
10
1. KP1TA Transmitter
1.1 Controls and Features
Front panel
Rear panel
1. Power Switch: Turns transmitter power ON/OFF.
2. Headphone Output Jack: Connects the headphone.
3. Headphone Volume Control: Adjust the volume of headphone.
4. Indicator of Volume Limiter: To indicate whether the limiter function works.
5. LCD: Display the working informations of transmitter.
6.
Set Button: To set and operate the transmitter.
7. Antenna.
8. Audio Output: Transport the audio signal to other equipment.
9. Audio Input: Input the audio signal from here.
10. Audio Gain Adjustment of Input.
11. Switching control for mono,stereo,mix mode.
12. DC Power Jack.
2
a. Level indicator of audio left/channel 1
b. Level indicator of audio right/channel 2
c. Indicator of transmission power
d. Indicator of volume limiter function
e. Channel indicator
f. Frequency indicator
3
Advertisement
