Advertisement
Quick Set-Up and Use Guide
KP1TA transmitter
Turn ON the system and set to
same frequency and channel
KP1TA transmitter
Press the battery compartment door
follow the direction instruction to open
Performance Guide
Aim at the characteristic of ear, to care and prevent your ear and equipment, the
normal sound pressure level of headphone is 90dB in a colsing circumstance.
Hereinafter, the divisiory datum for user reference ---on maximum time exposure
to sound pressure levels before hearing damage occurs.
90 dB SPL at 8 Hours
95 dB SPL at 4 Hours
100 dB SPL at 2 Hours
105 dB SPL at 1 Hours
110 dB SPL at 30 Minutes
115 dB SPL at 15 Minutes
120 dB SPL -----Damage may occur
KP1R
KP1R receiver
KP1R receiver
Install the batteries follow the battery direction
instruction which shown on the case of receiver
2
RACK MOUNTING DUAL RECEIVER
1.Align the receivers side by side so that front panels both face the direction
2.Place the supplied straddle bars in the recesses on the top and bottom of
the receivers.
So the barsoverlap both receivesrs.
CAUTION:DO not over-tighten the screws.
3.position the rack-mount brackets over the holes into the sides of each receiver.
4.Secure the brackets to the receivers with the supplied screws
5.Slide the linked receivers into a 19-inch audio equipment rack.
6.Secure the brackets to the rack using the supplied screws.
11
Advertisement
