Samsung AM***KNTD** User Manual page 38

Installation Procedure
Setting an indoor unit address and
installation option
Set the indoor unit address and installation option with remote
control option. Set the each option separately since you cannot
set the ADDRESS setting and indoor unit installation setting
option at the same time. You need to set twice when setting
indoor unit address and installation option.
Option setting procedure
Power
Temperature
Options
Timer
Direction
1 Remove batteries from the remote control.
2 Insert batteries and enter the option setting mode
while pressing (High Temp button) and
Temp button).
Check if you have entered the option setting status.
3
4 After entering the option setting status, select the
option.
38 English
DVM_BORACAY_IB_DB68-06415A-00_EN.indb 38
CAUTION
• Option setting is available from SEG1 to SEG 24
• SEG1, SEG7, SEG13, SEG19 are not set as page option.
• Set the SEG2~SEG6, SEG8~SEG12 as ON status and
SEG14~18, SEG20~24 as OFF status.
SEG1 SEG2
0
SEG7 SEG8
1
SEG13 SEG14
2
Air flow direction
(Up and down)
SEG19 SEG20
Mode
3
Fan speed
Air flow direction
On (SEG1~12)
(Left and right)
Settings
SET
(Low
SEG3 SEG4 SEG5
X X X X
SEG9 SEG10 SEG11
X X X X
SEG15 SEG16 SEG17
X X X X
SEG21 SEG22 SEG23
X X X X
Off (SEG13~24)
SEG6
X
SEG12
X
SEG18
X
SEG24
X
2016-08-31 오후 2:13:28