Advertisement
Multi Stroboscopic Flash
On the TS-4 transmitter, press and hold
button for 2 seconds or longer for multi-flash settings.
Under the multi flash mode, multiple flashes are fired continuously at a high speed.
Where the object is moving, an application of such technique captures several phases of movement on one same photo.
The flash output is manipulated by the number of flashes and flash frequency.
Number of flashes
Flash frequency
To set the number of flashes, press
on the TS-4 transmitter until the display starts blinking.
Next, set your preferred number of flashes using the navigational
buttons.
To set the flash frequency, press
on the TS-4 transmitter until the display starts blinking.
Next, set your preferred frequency using the navigational
buttons.
Advertisement
