Advertisement
Manual Mode
HSS Flash Mode
TTL MODE
HSS Flash MODE
M MODE
HSS Flash MODE
Flash output is adjustable from 1/128 to 1/1 full power with an increment of 0.1 F-Stops.
*All operations must be done on the transmitter of the TS-4 controller. Settings will not be applied when
operating on the unit itself.
After doing exposure compensation in <TTL> mode, switch to the <M> manual flash mode to keep
photographing under the determined flash
After setting up the M mode by pressing the
manipulate the
buttons to adjust flash output from 1/1 full power to the lowest output of 1/128
with an increment of 0.1 F-Stops and a total of 70 steps.
The HSS flash mode syncs flashes at camera shutter speed of 1/200 ~ 1/8,000 seconds.
Press
is displayed on both the LCD displays of TS-4 and i Flash TTL.
*For Nikon cameras, i Flash TTL enters HSS flash mode automatically according to the
shutter speed adjustment of camera.
Shutter speed settings
Bulb. 30~1/180 secs
1/200~1/8,000 secs
output.
button on TS-4,
on TS-4 transmitter to turn on the TTL HSS mode (when using Canon)
Sync mode settings
ordinary sync mode
HSS mode
Advertisement
