b. Install the system fan.
Figure 51. Installing the system fan
9. Connect the system fan cable to the system fan connector on the system board. See "System board"
on page 3.
10. Install the illuminated red dot cable to the new system fan.
11. Reinstall the computer cover and reconnect the cables. For details, see "Completing the parts
replacement" on page 40.
Replacing the illuminated red dot cable
Attention: Do not open your computer or attempt any repairs before reading the Important Product Information Guide.
1. Remove the computer cover. For details, see "Removing the computer cover" on page 30.
2. Disconnect the illuminated red dot cable from the system board. See "System board" on page 3.
3. Replace the illuminated red dot cable.
.
Chapter 5
Replacing hardware
43