Service Manual - VMH 9/12/18/24 SU & VMH30/36S D Series
3
Evaporator
How to remove the
evaporator.
1) After removing the
front panel assembly
and electrical parts
following procedure 1
and procedure 2,
remove the pipe
holder at the rear
side of the unit.
2) Remove the two
screws on the
evaporator at the
base bearing side.
3) Remove two screws
on the evaporator at
the fixed plates and
then lift the
evaporator assembly.
Two screws at the base bearing side
60
57
Two
screws at
the fixed
plates