Related Manuals for Innokin Technology CoolFire ULTRA
Summary of Contents for Innokin Technology CoolFire ULTRA
- Page 1 Cool Fire ULTRA 欧洲版英文说明书 尺寸：58*82mm 封面材质: 157g双铜板纸单面过哑胶 内页材质：128g双铜纸双面印刷 装订方式：胶装...
- Page 2 CoolFire ULTRA Unique Authoriza�on number. 2) Visit: h�p://www.innokin.com/verify-device/ 3) Enter the Unique Authen�ca�on number in the Authen�ca�on field. 4) Verify your CoolFire ULTRA is a genuine Innokin Vaporizer. If you have any ques�ons or sugges�ons, please write to us at support@innokin.com.
-
Page 3: Warranty Information
2. This product may be used with e-liquids that WARRANTY INFORMATION: contain nico�ne. If you are using e-liquid containing Innokin Technology provides a 90 day a�er sales nico�ne please refer to the informa�on provided in service warranty to all authorized vendors. - Page 4 4. This product is not intended to treat, mi�gate, 12. Innokin is not responsible for ba�ery and prevent or cure any disease or condi�on. It is charger explosions, or malfunc�ons, due not intended for use as a smoking cessa�on to the use of a low-quality charger. Only device.
- Page 5 CE/UL/FCC wall charger. The large OLED screen displays all important informa�on. To POWER OFF the CoolFire ULTRA: When the CoolFire ULTRA is not in use, click To POWER ON the CoolFire ULTRA: the power bu�on “ ” three �mes to power off...
- Page 6 Always check & confirm the material You must select the correct coil mode before and range of the a�ached coil. vaping. Power on the CoolFire ULTRA by pressing the “ ” Power bu�on 3x. CALIBRATION AND COIL SELECTION The screen will display the last selected se�ngs.
- Page 7 °F temperature mode. Steel), W(Wa�age Mode). Press the “ ” bu�on to lock the set temperature and ac�vate the CoolFire ULTRA. When the desired mode is selected press the The Fahrenheit Temperature Range can be bu�on “ ” to select Coil Type and ac�vate the adjusted from 300-600°F in 5°F increments.
- Page 8 Dry Hit Detec�on & Preven�on: Adjust Variable Wa�age: If there is insufficient eliquid in the coil, or if When the CoolFire ULTRA is in variable wa�age mode press and hold the “+” or “-” bu�on and the coil is not primed, the CoolFire ULTRA the set wa�age will flash.
- Page 9 Ohms detec�on. If the resistance of the turned off. atomizer is lower than 0.07Ω, the LED will light solidly for 5 seconds, the Ohms bar will blink and the CoolFire ULTRA will not power on. INTEGRATED SAFETY: Check Atomizer: 15 second cutoff: If there is no atomizer a�ached, or the atomizer...
- Page 10 Only use the included high quality charging cable. se�ng: Wall Adapters should be CE/UL/FCC cer�fied, When the CoolFire ULTRA is turned off it will high quality and authen�c. remember the current Temperature or wa�age Do not charge your vaporizer with your car.
- Page 11 How to refill the iSub VE Tank (NOT INCLUDED How to replace a coil: 1) Hold the iSub VE Tank with the threading up. IN EXPRESS KIT) 2) Unscrew the bo�om cap of the iSub VE Tank 1) Hold the top cap down and turn to open the 3) Hold the coil and gently pull to remove.
- Page 12 WHEN IS IT TIME TO CHANGE THE COIL? Warnings and precau�ons All coils will need to be replaced a�er being Nico�ne-containing e-liquids are not recommended used for a certain amount of �me. The �me for: between coil replacements will vary according •...
- Page 13 How to store the CoolFire ULTRA: If you inhale too much nico�ne or use the Always power off the CoolFire ULTRA when it product too much you may experience one or is not being used, or when it is going to be more of the following effects:...
- Page 14 Balanced Even Coil Heat-Up Ultra-low External Heat Genera�on Dry Hit Detec�on & Preven�on Ultra Low Standby Power Consump�on Manufacturer Shenzhen Innokin Technology Co., Ltd Building 6, Xinxin�an Industrial Park, Xinsha Road, Shajing, Bao’an District, 518104, Shenzhen, China Telephone: +86-755-2989-8770 Email: info@innokin.com...
Need help?
Do you have a question about the CoolFire ULTRA and is the answer not in the manual?
Questions and answers