Table of Contents
Advertisement
ATTACHING THE PHOTOMIC FTN FINDER
To
attach
the finder to the camera with the lens in place,
first
set
the diaphragm
at
f/5.6
and
place the finder in
posi-
tion loosely. Then depress the finder lock lever
and
press
down gently
on the finder until
it
clicks into place.
The
Photomic
FT
N
Finder
has
a
pair of pincer-type clamps
on
the bottom to hold it
securely
in place.
They
are loosened by
depressing the finder lock lever.
Mounting the finder
on
the camera body
without
a lens is
simple.
Just depress the finder lock lever
and
press down
gently on
the finder until it clicks into place.
To
remove the finder, depress the
finder lock
lever
and
press the finder release button located
on
the back
of
the
camera.
The
finder will
be unlocked
and can
be lifted
out.
Note: When using flash, be sure to set the camera for flash
by lifting up and turning the milled synchro-selector ring.
Refer to
the "Flash
Synchronization
"
section in
the Nikon F
instruction manual.
9
Hide quick links:
Advertisement
Table of Contents
