Westinghouse TR18361 Instruction Manual page 16

F20
It is extremely important that the chain brake be
checked for proper operation before each use and
that the chain be sharp in order to maintain the
kickback safety level of this saw. Removal of the
safety devices. Inadequate maintenance, or
incorrect replacement of the bar or chain may
increase the risk or serious personal injury due to
kickback.
FELLING A TREE(F20)
1. Decide the felling direction considering
the wind, lean of the tree, location of heavy
branches, ease of job after felling and other
factors
2. While clearing the area around the tree, arrange
a good foothold and retreat path.
3. Make a notch cut one-third of the way into the
tree on the felling side.
4. Make a felling cut from the opposite side of the
notch and at a level slightly higher than the
bottom of the notch.
WARNING
!
When you fell a tree, be sure to warn your
neighboring workers of the danger.
(1) Notch cut
(2) Felling cut
(3) Felling direction
Bucking and Limbing
WARNING
!
Always ensure your foothold. Do not stand on
the log.
Be alert to the rolling over of a cut log.
Especially when working on a slope, stand on
the uphill side of the log.
Follow the instructions in"For safe Operation"
to avoid kickback of the saw.
Before starting work, check the direction of bending
force inside the log to be cut. always finish cutting
from the opposite side of bending direction to prevent