Ar503Ew - Huawei AR500 Product Description

Huawei AR500&AR510&AR530&AR550&AR2500
Series Industrial Switch Routers
Product Description
1
3
5
7
9
11 CONSOLE interface
13 Two SIM card slots of LTE0
15 Two SIM card slots of LTE2

4.1.12 AR503EW

Appearance and Structure
Figure 4-12
Issue 02 (2016-11-25)
LTE3 antenna interface
GPS/BDS antenna interface
LTE0 antenna interface
Power input jack
NOTE
Use a DC power cable to connect the router
to an external power source.
USB interface (host)
NOTE
l The SIM card slots support double-card
single-standby.
l Industrial SIM cards are recommended
for the router.
NOTE
l The SIM card slots support double-card
single-standby.
l Industrial SIM cards are recommended
for the router.
shows the appearance of the AR503EW router.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 LTE2 antenna interface
4 LTE1 antenna interface
6 Two Wi-Fi antenna interfaces
8 LAN interfaces: four GE electrical
interfaces
NOTE
l LAN interfaces GE0 to GE3 can be
configured as WAN interfaces.
l GE0 is a management interface and is
used to upgrade the router.
10 RST button
NOTE
This button is used to reset the router.
l To restore the factory settings, hold down
the button for at least 5 seconds.
l To reset the system, press the button.
Resetting the router will interrupt services.
Exercise caution when deciding to press this
button.
12 Ground point
NOTE
Reliably ground the router by connecting a
ground cable to the ground point to protect
the router against lightning and interference.
14 Two SIM card slots of LTE1
NOTE
l The SIM card slots support double-card
single-standby.
l Industrial SIM cards are recommended
for the router.
16 Two SIM card slots of LTE3
NOTE
l The SIM card slots support double-card
single-standby.
l Industrial SIM cards are recommended
for the router.
4 Appearance
59