Table of Contents
Advertisement
Connecting without Sony BUS system
TV main unit
VIDEO OUT
VIDEO2 IN
Black
Yellow
Purple/white
Orange/white
Light green
Red
*1 An adaptor (optional) may be necessary for your car and
car audio system. In such case, consult your dealer.
*2 First connect the black ground lead, then connect the
orange/white striped, yellow and red power input leads.
Film antenna qf
TV
antenna
amplifier
unit qd
Black
Red
RCA interconnects (not supplied)
This terminal is not used in this case.
Antenna connector *
Fuse (5A)
Protection device
Tap 7
Tap 7
To the commercially avilable
Back Camera or Navigation
System
Antenna input
cable qg
To a metal point of the car
To the +12 V power
terminal which is
energized in the
accessory position of the
ignition key switch.
Be sure to connect the
black ground lead first.
Car audio, rear
passenger TV or
monitor etc.
DVD player
etc.
from a car antenna *
1
Genuine Car
audio
1
To a metal point of the car
To the +12 V power terminal which
is energized at all times
To the +12 V power terminal of the
back lamp lead of car
To a car's illumination signal *
Parking brake switch lead of car
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch.
Be sure to connect the black ground lead
first.
2
9
Advertisement
Chapters
Table of Contents
