Advertisement
Making a Call Alert
1
Press the programmed One Touch Access
button to send the Call Alert to a predefined
ID.
2
The LED lights up solid green.
3
Two chirps indicate that the Call Alert
acknowledge is successfully received.
Sending a Quick Text Message
1
Press the programmed One Touch Access
button send a predefined Quick Text Message
to a predefined ID.
2
The LED lights up solid green.
3
Two chirps indicate that the message is sent
successfully.
OR
A low-pitch tone indicates that the message
cannot be sent.
English
Sending an Emergency Alarm
1
Press the programmed Emergency On
button.
2
The LED lights up solid green.
3
When an Emergency Alarm acknowledgment
is received, the Emergency tone sounds. The
LED blinks green.
OR
If your radio does not receive an Emergency
Alarm acknowledgement, and after all retries
have been exhausted, a low-pitch tone
sounds.
4
Radio exits the Emergency Alarm mode.
If your radio is set to Silent, it will not display any
audio or visual indicators during Emergency
mode.
Privacy
Press the programmed Privacy button to toggle
privacy on or off.
IP Site Connect
NOTE: This feature is not applicable in Capacity
Plus.
1
Press the programmed Site Lock On/Off
button to toggle automatic site roaming on or
off.
2
The LED blinks yellow rapidly when the radio
is actively searching for a new site, and turns
off once the radio locks on to a site.
OR
1
Press the programmed Manual Site Roam
button.
2
A tone sounds and the LED blinks green.
3
You hear a positive indicator tone and the
LED turns off, indicating the radio is locked on
to a site.
OR
You hear a negative indicator tone and the
LED turns off, indicating the radio is unable to
lock on to a site.
Advertisement
