Web Server - ADS NAS Drive Kit User Manual

WEB Server

Administrator WEB Server:
The Administration port is the port for accessing the Web-based management interface.
As default, the Port 80 is configured as the Administrator WEB Server Port.
WEB Server:
The WEB server allows users to construct a Website by HTML format.
To activate the WEB server, click "Yes" to enable. Specify a port number from 1~65535.
"WEB Folder" is the location where you place your HTML files.
Note:
As default, the Port 80 is not allowed to setup for it has been configured as the port for accessing
the Web-based management interface.
We also provide a Website template for you to build-up a Website and enjoy the WEB server
properties easily. To use the template, access the CD we provide, copy the data in the folder
"WEB Template". Paste the data in the folder that you configured as the "WEB Folder"
To access the Web Server:
The address for linking the WEB server is the IP address of the NAS Drive Kit with the port
number added after by a colon. (i.e. 192.168.1.1:8080, when the IP address of the NAS Drive Kit
is 192.168.1.1 and the port number of the web server is configured as 8080)
Note:
For WAN users to get access to the FTP or WEB server, you should link the NAS Drive Kit to a
- 48 -