Maintenance; Trouble Shooting - DEHACO NANO User Manual

DEHACO B.V.
Kruisbaak 25, 2165 AJ Lisserbroek (NL)
P.O. Box 189, 2160 AD Lisse (NL)
Tel.:+31(0)252 417 950, fax 418 531
www.dehaco.nl
info@dehaco.nl

11. Maintenance

Before carrying out any inspection, maintenance or reparation always
Daily
Inspect the unit visually for damage.

Repair damage, however slight, immediately, or have it repaired.
This is for your safety and to maximise the lifetime of the machine.
Also inspect the electricity cable.

If damaged, remove it immediately and have it repaired.
Your safety comes first!
Keep the nebuliser clean!! This reduces the risk of accidents, and works more

comfortable!

12. Trouble shooting

Repairs must be carried out by qualified personnel only. Use only
original spare parts. This guarantees the safety of the equipment!!
1) The fan bearings are noisy/not running smoothly.
Replace the bearings. Mount using a liquid thread locker.
2) The ventilator will not start
No voltage: Turn on power / turn on regulator / replace fuse.
Voltage present: Carbon brush is worn: replace the carbon brush.
3) Thermal protection stalls:
Clean / Replace the bearings / Replace the windings.
4) Nebuliser is not receiving water.
Check: the water flow / the control valve / clean the filter.
User manual
WARNING!!!
remove the plug from the socket !!
Clean carefully!!! Never use a high pressure cleaner!!
WARNING!
DEHACO-NANO v2.0-en
ATTENTION!
oct 2010 page- 10-