GENERAL SAFETY RULES can be thrown or become entangled in the machine. WARNING: n Keep firm footing and balance. Do not overreach. Over- reaching can result in loss of balance or exposure to hot Read and undeRstand all instRuctions. Fail- surfaces.
Page 6
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Precautions that involve your safety.
FEATURES SPECIFICATIONS Weight ...............................10.4 lbs. (4.7 kg.) Engine displacement ..............................30cc Air Velocity ................................320 Km/h Air Volume ................................12 m /min Sound power level LwA ............................107 dB(A) Vibration................................. 17.1 m/s Maximum engine performance ..........................0.78 kw Maximum rotational frequency of the engine ....................10,000 / min Engine speed at idling ...........................2,800 ~ 3,500 / min Fuel consumption at max.
ASSEMBLY UNPACKING n Make sure the vacuum bag is zipped and closed before starting the unit. Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Inspect the tool carefully to make sure no breakage or Stop the engine and disconnect the spark plug wire before damage occurred during shipping.
OPERATION WARNING: Petrol is extremely flammable and explosive. A fire or explosion from petrol will burn you and others. 1 LITRE 20 ML 2 LITRES 40 ML MIXING ThE FUEL 3 LITRES 60 ML 50:1 4 LITRES 80 ML n This product is powered by a 2-stroke engine and 5 LITRES 100 ML requires pre-mixing petrol and 2-stroke oil.
Page 10
OPERATION n Operate power equipment at reasonable hours only n Hold the engine higher than the inlet end of the vacuum — not early in the morning or late at night when people tube. might be disturbed. Comply with the times listed in local n Always point vacuum tube downhill when working on a ordinances.
MAINTENANCE dirty and may need to have the muffler replaced by an WARNING: authorized servicing dealer. When servicing, use only identical replacement parts. WARNING: Use of any other parts may create a hazard or cause Never run the blower without the spark arrestor in place. product damage.
TROUBLE ShOOTING IF ThESE SOLUTIONS DO NOT SOLVE ThE PROBLEM CONTACT YOUR AUThORIZED SERVICING DEALER. PROBLEM POSSIBLE CAUSE SOLUTION Engine will not start. 1. No spark. 1. Check spark. Remove spark plug. Reattach the spark plug cap and lay spark plug on metal cylinder. Pull the starter rope and watch for spark at spark plug tip.
In the event of malfunction within the guarantee period, please return the product UNDISMANTLED with proof of purchase, to your dealer or nearest Ryobi Service Centre. Your statutory rights in respect of defective products remain unaffected by the warranty.
Need help?
Do you have a question about the PBV-30A and is the answer not in the manual?
Questions and answers