OPERATOR'S MANUAL
MANUEL D'UTILISATION
MANUAL DEL OPERADOR
18 VOLT HYBRID BLOWER
SOUFFLANTE HYBRIDE DE 18 V
SOPLADORA HÍBRIDA DE 18 V
P2107
ACCEPTS ALL ONE+ BATTERY PACKS
BATTERIES AND CHARGERS SOLD SEPARATELY
COMPATIBLE AVEC TOUS LE BLOC-PILES ONE+ V
PILE ET CHARGEUR VENDUS SÉPARÉMENT
ACEPTA TODOS LOS PAQUETES DE BATERÍAS DE ONE+
LAS BATERÍAS Y EL CARGADOR SE VENDEN POR SEPARADO
Your blower has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Ce soufflante a été conçu et fabriqué conformément à nos strictes
normes de fiabilité, simplicité d'emploi et sécurité d'utilisation.
Correctement entretenu, cet outil vous donnera des années de
fonctionnement robuste et sans problème.
AVERTISSEMENT :
blessures, l'utilisateur doit lire et veiller à bien comprendre le
manuel d'utilisation avant d'employer ce produit.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
Pour réduire les risques de
Su sopladora ha sido diseñado y fabricado de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad de
uso y seguridad para el operador. Con el debido cuidado, le
brindará muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA:
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
Para reducir el riesgo de lesiones,
Need help?
Do you have a question about the P2107 and is the answer not in the manual?
Questions and answers
Need new switch for the on and off.some of it is broken
The replacement switch part number for the Ryobi P2107 is not provided in the context.
This answer is automatically generated
Need a new off and on switch
To replace the on and off switch for the Ryobi P2107:
1. A 3D-printed replacement switch can be used. A model is available online, and it takes about 20 minutes to print.
2. After printing, lightly sand the switch for a better fit.
3. Test fit the switch in the blower to ensure it works properly.
4. If you do not have access to a 3D printer, pre-printed switches are available for purchase online.
5. The original switch part is not available on the Ryobi parts store, so 3D printing or purchasing from a third-party seller is the main option.
This method is a simple fix that can be done quickly with proper tools.
This answer is automatically generated