Ryobi P2100 Operator's Manual
Ryobi P2100 Operator's Manual

Ryobi P2100 Operator's Manual

18 volt blower
Hide thumbs Also See for P2100:

Advertisement

ACCEPTS ALL ONE+ BATTERY PACKS
BATTERIES & CHARGERS SOLd SEPARATELY
Your blower
has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
18 VOLT BLOWER
P2100
P2100A
P2100B

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi P2100

  • Page 1 When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE OPERATOR’S MANUAL 18 VOLT BLOWER P2100 P2100A P2100B...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS INTROdUCTION CALL US FIRST For any questions about operating or maintaining your product, call the Ryobi Your product has been fully tested prior to shipment to ensure your complete satisfaction. Help Line! ®...
  • Page 3: Important Safety Instructions

     do not use blower if switch does not turn it on or off. A blower that cannot be controlled with the switch is dangerous and must be repaired.
  • Page 4: Important Safety Instructions

    An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.  do not charge blower battery in a damp or wet location. Following this rule will reduce the risk of electric shock.
  • Page 5: Symbols

    Alternating Current Direct Current Class II Construction Wet Conditions Alert Read The Operator’s Manual Safety Alert Keep Bystanders Away Eye and Hearing Protection Long Hair Blower Tubes Loose Clothing SYMBOLS dESIGNATION/EXPLANATION Voltage Current Frequency (cycles per second) Power Time Type of current...
  • Page 6: Symbols

    To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand com- pletely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service for assistance.
  • Page 7: Features

    Before use of this product, familiarize yourself with all operating features and safety rules. FEATURES BLOWER TUBE The blower tube can be installed on the blower without using any tools. POWER SWITCH Fig. 1...
  • Page 8: Assembly

    ASSEMBLING THE BLOWER TUBE See Figure 2.  With the logo area facing up, slide the blower tube over the outlet on the blower housing.  Press down on the tab on the blower housing outlet.
  • Page 9 This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs. For complete charging instructions, refer to the operator’s manual for the P113 charger. For battery pack instructions, see the manual for the P104 lithium-ion battery pack or the P100 nickel-cadmium battery pack.
  • Page 10: Operation

    Battery tools are always in operating condition. Therefore, switch should always be in the OFF position when not in use or carrying at your side. OPERATING THE BLOWER See Figure 5.  To keep from scattering debris, blow around the outer edges of a debris pile.
  • Page 11: Maintenance

    All other parts should be replaced at an Authorized Service Center. STORAGE  Clean all foreign material from the blower.  Store indoors in a place that is inaccessible to children. Keep away from corrosive agents such as garden chemi- cals and de-icing salts.
  • Page 12: Warranty

    Blower Fans, Blower and Vacuum Tubes, Vacuum Bag and Straps, Guide Bars, Saw Chains Techtronic Industries North America, Inc., reserves the right to change or improve the design of any RYOBI outdoor product without assuming any obligation to modify any product previously manufactured.
  • Page 13 NOTES...
  • Page 14 1-800-860-4050. • HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT: To obtain Customer or Technical Support please contact us at 1-800-860-4050. RYOBI is a registered trademark of Ryobi Limited used under license. ® TECHTRONIC INdUSTRIES NORTH AMERICA, INC. 983000-961 0-5-08 (REV:04) OPERATOR’S MANUAL...

This manual is also suitable for:

P2100bP2100a

Table of Contents