Frequency List / Auto-Pick; How To Use Auto-Pick - Zaxcom RX-12RR User Manual

Zaxcom RX-12R

Frequency List / Auto-Pick

This page displays the current chosen frequency of each receiver module. If a
module is set to dual mode both the A and B frequencies will be displayed. From
this page frequencies can be selected so Auto-Pick can change the frequency of
any receiver(s).

How to use Auto-Pick

Select a receiver by rotating the menu encoder knob.
1.
Press the encoder knob to select the receiver. That will put a green check
2.
mark to the right of the frequency that will be changed.
After all the desired receivers are selected, press the star key to let the
3.
RX-12R choose a frequency with the cleanest scan for each receiver.
Press the # Key to uncheck the receiver(s).
4.
12
System Menu