Ani Function; General - Icom IC-V8000 Optional Instructions

1

ANI FUNCTION

I General
The ANI (Automatic Number Identification) function is a
method of selective calling which features an answer back
function. This allows you to confirm whether or not a call has
reached the receiving party, even if the operator is temporar-
ily away from the transceiver.
In order to use the IC-V8000's ANI function, the following
items and operation are necessary.
• UT-108
DTMF DECODER UNIT
• ANI code programming (via transceiver or PC, using the
optional CS-V8000
• HM-118TN/TAN or HM-133V
Once ANI mode is selected, the transceiver cannot be used in
frequency indication mode unless frequency indication mode
is selected (initial set mode or PC cloning), or the CPU is
reset.
1
)
CLONING SOFTWARE
ANI selective code (push [PTT])
Answer back (automatic)
Connection code (push [PTT])
Communication
Disconnect code ([PTT]+[#])
Confirmation code (automatic)