Operation
You can detach the compressor from the cooling device and mount it in another
place on the cooling device or separately from it:
4
Make sure that the refrigerant line is 1.5 m long.
7
Operation
I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and care" on page 10).
7.1
Energy saving tips
• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• Defrost your cooling device as soon as a layer of ice forms.
• Avoid unnecessarily low temperatures.
• Clean the condenser of dirt (dust etc.) at regular intervals.
8
L = 1,5 m
CD30
EN