JVC RX-6042S Service Manual page 7

3.5 Removing the DSP board, audio input board, DVD board and video board
(See Fig.7)
• Prior to performing the following procedure, remove the top
cover and rear panel.
(1) From the top side of the main body, Remove the tie band.
(2) Disconnect the DSP board from the connector
the audio board.
(3) Disconnect the audio input board from the connector
CN421 on the audio board.
(4) Disconnect the DVD board from the connector
the audio board.
(5) Disconnect the video board from the connector
the audio board.
3.6 Removing the S-Video board
(See Fig.8)
• Prior to performing the following procedure, remove the top
cover and rear panel.
(1) From the top side of the main body, disconnect the parallel
wire from the connector
(2) Disconnect the S-Video board from the connector
on the audio board.
CN481
CN431
CN441
CN511 on the S-Video board.
CN461
DVD board
Video board
on
on
Tie
band
on
CN481
DSP
board
CN421
Audio input board
Audio board
CN461
Audio board
CN431 CN441
Fig.7
S-Video board
CN511
Fig.8
(No.MB167)1-7