Disassembly Method - JVC RX-6000VBK Service Manual

Disassembly method

Removing the top cover (See Fig.1)
1. Remove the four screws A attaching the top cover
on both sides of the body.
2. Remove the three screws B on the back of the body.
3. Remove the top cover from behind in the direction of
the arrow while pulling both sides outward.
Removing the front panel assembly
Prior to performing the following procedure, remove
the top cover.
1. Disconnect the harness from connector CN314 on
the volume control board and connector CN811 on
the main board.
2. Remove the three screws C
panel assembly.
3. Remove the four screws D attaching the front panel
assembly on the bottom of the body.
(See Fig.2 and 3)
Volume control
board
attaching the front
Bottom cover
RX-6000VBK/RX-6008VBK/RX-6100VBK
Top cover
A
2
A
2
Fig.1
C
CN314
Fig.2
D
Fig.3
B
Front panel assembly
Main board
CN811
Front panel assembly
2-1