JVC KD-SV3204UI Service Manual page 36

Https://www.bueno-electric.com
After the setting zone is selected, press
Note : The system defaulted setting will be displayed for the invalid setting zones.
After entering the setting alteration window, press " ∧ " or " ∨ " key, "<" or ">" key to select
the alteration position press "+" or " － " key to make alteration For the contents in the effective bit
of the control Character press ">" key and hold it for 3 second, the selective sub-menu containing
the contents in the effective bit of the control character are displayed. In the sub-menu, the
effective bit of the control character can be easily put in-service or out of service.
Control character ....................................0000
Analog variable summation self-check
withdrawal
TA rated current
CB stealing tripping and reclosing
After alteration, press
The system will give up the alteration and return to the previous menu.
After all the alteration are confirmed to be completed, press
giving up the alteration, press "Q" key, the system will give up the alteration and return to the
previous menu.
Before solidification, the system wants you to identify the target for solidification. By doing
so, the alteration zone and duplication of a setting zone can be completed.
When the target solidification zone is selected, press
you entering the secret codes, the process will not be repeated here.
Contact: sales@bueno-electric.com
Setting alteration
Select setting zone : 00±
Current operating zone : 01
← ┘
【
Setting alteration (0)
Control character 1....0000
Control character 2...100.0A
Current zone I.........100.0A
← ┘ key to confirm. In case of giving up the alteration, press "Q" key.
【 】
Setting solidification
Select setting zone : 00±
Current operating zone : 01
30
BUENO ELECTRIC BUENO ELECTRIC BUENO ELECTRIC BUENO ELECTRIC
k ey to enter the setting alteration window :
】
±
5A
← ┘ key to solidify. In case of
【 】
← ┘ k ey to solidify. The system asks
【 】
Fax: +86-25-51816989