Advertisement
Operating Instructions and Parts Manual
oPerAtING INstrUCtIoNs
- Basic operation: Slightly touch the switch on top of the light to turn it on. Press down the tail switch to open the
flashlight.
- One touch of the orange switch makes red light 100% luminous, one more touch of the switch makes red light
SOS and one more touch makes 100% luminance.
- The hands free sensor function button allows you to wave your hand in front of the sensor to have 100%
luminance when turned on. A small red light indicates that the hands free sensor is turned on.
bAtterY rePLACemeNt
1. Press down the tail switch to open the flashlight.
Use AND mAINteNANCe
- Please do not dismantle the sealing parts at the head, otherwise, it will lead to invalid repair and even destroy the
headlight.
- Please use quality batteries only. When the headlight is not to be used for a long period of time, take out the
battery, otherwise, the headlight may be destroyed due to leakage or explosion of poor quality batteries.
- After a long period of use, the o-ring of the headlight may wear out. In this case, please replace the o-ring to
maintain the water-proof performance of the headlight.
- Frequently clean the headlight surface, particularly the tail switch.
- If the headlight flashes abnormally or does not come on, it may be caused by the following:
- Reason 1: Low battery power.
Solution: Replace the battery (note positive and negative poles when installing the new batteries.)
- Reason 2: The conduction contact surface or other contact surface/point of the thread or the PCB is dirty.
Solution: Use alcohol cotton swabs to clean the conduction contact surface or point.
If the above methods do not work, please contact GreatLite customer service.
SEARCH & RESCUE SERIES
E51 MULTI-FUNCTIONAL HEADLIgHT
3
EXPE51
Advertisement
