Advertisement
Quick Links
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
Toughened Ultra-Clear
Glass Lens with Anti-Reflective
Coating Creates Bright Light
Cree XM-L(T6)
LED Bulb
18650 Battery
UNPACKING
After unpacking, inspect carefully
for any damage that may have
occurred during transit. Check
for loose, missing, or damaged
parts. If any damage is observed,
a shipping damage claim must be
filed with carrier. Do not use the
flashlight if it appears damaged in
any way, operates abnormally or is
missing parts.
WARNING
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
The following safety information is provided as guidelines to help you operate your flashlight under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with
the information necessary for safe use and operation. Please read and retain these instructions for the continued
safe use of your flashlight. Failure to follow instructions listed below may result in serious injury. In addition, make
certain that anyone that uses the equipment understands and follows these safety instructions as well.
Li-on
Charging
Anti-Slip
Unit
MAX OUTPUT
800
LUMENS
1
ProFessIoNAL serIes
e36-e02 LeD FLAshLIGht
Anti-Roll Design
Lanyard
MAX RUNTIME
BEAM DISTANCE
300m
2h
EXPE36-E02
Pocket Clip
On/Off
Button
IMPACT RESISTANT
WATER RESISTANT
IPX-6
1.5m
Advertisement
Summary of Contents for GreatLite Professional Series
- Page 1 Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference. ProFessIoNAL serIes e36-e02 LeD FLAshLIGht Anti-Roll Design...
- Page 2 Such preventative safety particular application, DO NOT use the flashlight until measures reduces the risk of starting the tool you have first contacted GreatLite to determine if it can accidentally. or should be performed on the product.
- Page 3 - Reason 2: The conduction contact surface or other contact surface/point of the thread or the PCB is dirty. Solution: Use alcohol cotton swabs to clean the conduction contact surface or point. If the above methods do not work, please contact GreatLite customer service.
- Page 4 LeD FLAshLIGht Note Figure Description Quantity GreatLite and/or it’s distributors have provided the parts list and assembly diagram as a reference only. Neither GreatLite 800 Lumens E36 and/or it’s distributors make any representation or warranty of Flashlight any kind to the buyer and/or user of this tool that he or she is Lanyard qualified to do any repairs or replace any parts of this product.