Advertisement
SofTec Microsystems
IDB-ST7FLITE2
Evaluation Board
For STMicroelectronics
ST7FLITE1/LITE2 FLASH Families
User's Manual
1. Introduction
Copyright © 2003 SofTec Microsystems
®
DC00689
Overview
The IDB-ST7FLITE2 Evaluation Board demonstrates the capabilities of
the ST7FLITE1/LITE2 FLASH microcontrollers. The IDB-ST7FLITE2
Evaluation Board can be used as a standalone application or with an
emulator system, such as inDART-STX, through an ISP connection.
Board Features
The IDB-ST7FLITE2 Evaluation Board has the following hardware
features:
SofTec Microsystems
E-mail (general information): info@softecmicro.com
E-mail (marketing department): marketing@softecmicro.com
E-mail (technical support): support@softecmicro.com
Web: http://www.softecmicro.com
Important
SofTec Microsystems reserves the right to make improvements to its products, their documentation and software routines, without notice. Information
in this manual is intended to be accurate and reliable. However, SofTec Microsystems assumes no responsibility for its use; nor for any infringements
of rights of third parties which may result from its use.
SOFTEC MICROSYSTEMS WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, OR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSI BILITY THEREOF.
Trademarks
inDART is a trademark of SofTec Microsystems.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corpor a tion.
PC is a registered trademark of International Business Machines Corporation.
Other products and company names listed are trademarks or trade names of their respe ctive companies.
Advertisement
Table of Contents
Related Manuals for SofTec Microsystems IDB-ST7FLITE2
Summary of Contents for SofTec Microsystems IDB-ST7FLITE2
-
Page 1: Board Features
SofTec Microsystems reserves the right to make improvements to its products, their documentation and software routines, without notice. Information in this manual is intended to be accurate and reliable. However, SofTec Microsystems assumes no responsibility for its use; nor for any infringements of rights of third parties which may result from its use. - Page 2 9. A connector for a 9-12 V, 200 mA power supply; 10. A connector area to access the I/O pins of the microcontroller for expansion prototyping; 11. A prototyping area. The IDB-ST7FLITE2 Demo Board Supported Devices The IDB-S T7FLITE2 Evaluation Board supports the following DIP20 devices: §...
-
Page 3: Recommended Reading
ST7 User’s Manual Addendum. 2. Getting Started Overview The IDB-ST7FLITE2 Evaluation Board can be used in conjunction with a ISP-based emulator/programmer, such as SofTec Microsystems’ inDART-STX In-Circuit Debugger/Programmer. If you use the evaluation board with SofTec Microsystems’ inDART-STX, a sample application is provided. - Page 4 IDB -ST7FLITE2 User's Manual 5. By rotating the potentiometer on the demo board, you affect the results of the A/D conversion, and the binary value of each conversion is displayed on the LEDs. 6. When you want to stop the sample application, select Debug > Stop Program from the STVD7 main menu.
Need help?
Do you have a question about the IDB-ST7FLITE2 and is the answer not in the manual?
Questions and answers