Alarms - Samsung SGH-P910 User Manual

5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone's
Bluetooth feature must be active and its visibility
must be enabled.
If an unauthorised Bluetooth device sends data to
your phone, the phone displays a confirmation
message. To receive data, press <Yes>.

Alarms

(Menu 7.4)
Use this menu to set alarms to sound at specific
times. The alert type for a normal alarm corresponds
to the call alert type settings in the currently
selected profile. A wake-up alarm does not be
affected by your profile setting.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Time: enter the time for the alarm to sound.
• Repeat: select a repeat option.
• Alert tone: select an alarm tone.
3. Press <Options> and select Save.
Stopping an alarm
When the time for an alarm comes and the alarm
sounds:
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <OK> or [
Press <Snooze>, to cause it to sound again
after 5 minutes. You can do this a maximum of 5
times.
Press any key, except <OK>, [
<Snooze>, to mute the alarm tone.
Deactivating an alarm
When you do not need an alarm any longer, you can
deactivate it.
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line and press [
Setting the alarm to sound when the phone
is off
From the Alarms screen, select Auto power → On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
].
], or
].
61