Samsung SGH-P910 User Manual page 52

SMTP port: enter the SMTP port number.
Use SSL: activate the use of the SSL (Secure
Sockets Layer) protocol.
Retrieving server type: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
POP3 server/IMAP4 server: enter the IP
address or host name of the POP3 or IMAP4
server.
POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
Use SSL: activate the use of the SSL (Secure
Sockets Layer) protocol.
IMAP4 retrieving option: (IMAP4 protocol
only): set whether the phone retrieves only new
messages or all messages.
Retrieving option: set which part of e-mails
the phone retrieves from the server.
Keep in server: leave the copies of e-mails in
the server after retrieving.
My Address: set your e-mail address.
User name: enter the POP3 or IMAP4 user
name.
Password: enter the POP3 or IMAP4 password.
Use SMTP Authentication: enable SMTP
authentication, which requires the user to log in
before sending e-mails.
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name: enter the SMTP user name.
Password: enter the SMTP password.
Voice mail
(Menu 5.0.4)
You can change the number of the voicemail server.
You must store the voicemail server number
before accessing the server. Your service provider
can give you the number.
Video mail
(Menu 5.0.5)
You can change the number of the videomail server.
You must store the videomail server number
before accessing the server. Your service provider
can give you the number.
Push message
(Menu 5.0.6)
You can change the settings for receiving push
messages from the wireless web server.
• Receiving option: set whether or not to receive
push messages from the web server.
• Direct launch: set whether or not your phone
automatically launches the web browser to
access a push message as it comes in.
• Scrolling ticker: set whether to display push
message alerts in Idle mode.
49