Using the video call feature
In a 3G (UMTS) service area, your phone can make
or receive a video call, allowing you to see another
person on the screen during a conversation. The
other person's phone must support the video call
feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [
] and if their phone is compatible, the
other person appears on the screen.
Answering a video call
When you receive a video call, answer as you would
when as receiving a voice call. Press <Show me>
to allow the caller to see you.
Using video call options
During a video call, press <Options> to access the
following options:
•
Loudspeaker/Loudspeaker off: turn on the
Speakerphone feature or switch back to Normal
mode.
•
Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or hands-free car
kit or back to the phone. To use this feature, you
first need to connect your headset or car kit to
the phone.
p. 60
•
Mute camera/Unmute camera: turn the
camera off or on.
•
Mute voice/Unmute voice: turn the
microphone off or on.
•
Mute & voice off/Unmute all: turn the camera
and the microphone off or on.
•
Mute keytone/Unmute key tone: turn the key
tones off or on.
•
Record video call: record your video call
conversation. You can access the recorded
conversations in the Videos folder.
•
Zoom: display the zoom control bar and zoom in
or out by pressing [Up] or [Down].
•
Brightness: display the brightness control bar
and adjust the brightness by pressing [Left] or
[Right].
•
Effects: change the colour tone of the image.
•
Hide information/Show information: hide or
display information about the video call.
•
Send DTMF: send DTMF (Dual tone multi-
frequency) tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook.
•
Video quality: change the image quality of the
camera.
•
End call: end the video call.
29
Need help?
Do you have a question about the SGH-P910 and is the answer not in the manual?